The following procedure explains loading paper into the LCT.
LCT (optional) uses 81/2”×11” paper exclusively. Only load 81/2”×11” paper. If you want to load A4, contact your service representative.
Align the paper stacks and load them against the left and right walls, or a paper misfeed might occur.
Do not stack paper over the limit mark.
Pull out the LCT, slowly until it stops.
With the print side up, align all four sides of two paper stacks, and then load them next to each other in the tray. Each side has a limit of 1,000 sheets.
Push the paper tray slowly in until it stops.