General Features

You can set whether Auto Image Density is “On” or “Off” when the machine is turned on, reset, or modes are cleared.

• Full Color

  • On

  • Off

• B&W

  • On

  • Off

You can select the original type effective when the power is turned on, or modes cleared.

• Full Color

  • Text

  • Text/Photo

  • Photo

  • Pale

  • Generation Copy

  • Map

• B&W

  • Text

  • Text/Photo

  • Photo

  • Pale

  • Generation Copy

  • Map

When you select “Text / Photo” or “Photo” in “Original Type Priority”, you can change the settings of the selected original type.

• Glossy Photo

• Printed Photo

• Copied Photo

You can have the original types shown on the initial display.

• Display

• Hide

If you select [Hide], the display is as below.

You can choose to have the available paper trays and sizes shown on the initial display.

• Display

• Hide

If you select [Hide], the display is shown as below. Press [Auto Paper Select] to display paper sizes.

You can set the original orientation when making two-sided copies.

• Top to Top

• Top to Bottom

You can set the copy orientation when making two-sided copies.

• Top to Top

• Top to Bottom

The maximum copy quantity can be set between 1 and 999.

The default setting is 999 sheets.

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected.) This function is called “Auto Tray Switching”. This setting specifies whether to use Auto Tray Switching or not.

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message “Load paper.” is displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message “Load paper.” is displayed.

The beeper (key tone) sounds if you forget to remove originals after copying.

• On

• Off

If Panel Tone of User Tools (System Settings) is [Off] the beeper does not sound irrespective of the Tone: Original remains setting.

You can choose whether or not the beeper sounds when copying is complete.

If Panel Tone of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

• On

• Off

You can assign up to six frequently-used functions to Copy Function keys.

• Off

• 2 originals 2 Sided: Top to Top

• 2 originals 2 Sided: Top to Bottom

• 2 Sided 2 Sided

• 2 Sided: Top to Top 2 originals

• 1 Sided 1 Sided Combine: 2 originals

• 1 Sided 1 Sided Combine: 4 originals

• 1 Sided 1 Sided Combine: 8 originals

• 4 originals 2 Sided Combine: Top to Top

• 4 originals 2 Sided Combine: Top to Bottom

• 1 Sided Magazine

• 2 Sided Magazine

• Create Margin

• Original Orientation

• Batch

• Staple: Top Slant/Left

• Staple: Bottom Slant/Left

• Staple: Left 2

• Staple: Top 2

• Staple: Top

• Staple: Bottom

• Saddle Stitch

• 2 Holes Left

• 2 Holes Top

• 3 Holes Left

• 3 Holes Top

• 4 Holes Left

• 4 Holes Top

• Positive/Negative

You can assign up to six frequently-used functions to Document Server Storage keys.

• Off

• 2 Sided original: Top to Top

• 2 Sided original: Top to Bottom

• 1 Sided 1 Sided Combine: 2 originals

• 1 Sided 1 Sided Combine: 4 originals

• 1 Sided 1 SIded Combine: 8 originals

• 2 Sided: Top to Top 1 Sided Combine: 2 originals

• 2 Sided: Top to Bottom 1 Sided Combine: 2 originals

• 2 Sided: Top to Top 1 Sided Combine: 4 originals

• 2 Sided: Top to Bottom 1 Sided Combine: 4 originals

• 2 Sided: Top to Top 1 Sided Combine: 8 originals

• 2 Sided: Top to Bottom 1 Sided Combine: 8 originals

• Create Margin

• Original Orientaion

• Batch

• Positive/Negative