Adjusting the Volume
The following describes how to adjust the volume.
You can change the volume of the following sounds that the machine makes.
On Hook Mode
Heard when the [On Hook] is pressed.
At Transmission
Heard when Immediate transmission is performed.
At Reception
Heard when the machine receives a document.
At Dialing
Heard after pressing the [Start] key, until the line connects to the destination.
At Printing
Heard when a received document is printed.
Press [User Tools/Counter] key.
Press [Facsimile Features].
Check that [General Settings] screen appears.
Press [Adjust Sound Volume].
Press [Lower] or [Louder] to adjust the volume, and then press [OK].
Press [User Tools/Counter] key.
The standby display appears.
You can adjust the On Hook volume when you press the [On Hook]. See “On Hook Dial”, Facsimile Reference.
You can also adjust the volume of the handset ringer. See “Connecting the Telephone Line”, General Settings Guide.
When you press [Check] on the Adjust Sound Volume screen, you will hear a confirmation sound so you can check the volume.
If you press [Cancel], the volume setting is canceled. The display returns to that of step
.You can set the volume level to between 0 and 7.
