How to Use Sample Print
Follow the procedure below to print a document using the Sample Print function.
Windows 95 / 98 / Me
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
Select the printer, and then click [Properties].
Click the [Setup] tab.
In the [Job Type:] list, click [Sample Print].
Click [Details...].
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9) characters.
The user ID associates the user with his / her jobs.
Click [OK].
Click [OK] to close the printer properties dialog box.
Set the number of copies to two or more, and then start the printing from the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps.
If you want to delete a saved job, see Deleting a Sample Print File
.
On the machine's control panel, press the [Printer] key to display the printer screen.
Press [Print Jobs].
Press [Sample Print Job List].
A list of sample print files stored in the machine appears.
User ID, Date / Time and File Name also appear.
Select the file you want to print by pressing it.
A list of the print files stored in the machine appears.
Press [Print] to change the number of sets to be printed.
Enter the new number of sets using the number keys.
If you do not want to change the set quantity, perform the following step.
You can enter up to 999 sets.
Press [Clear/Stop] to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of all settings is applied.
Press [Yes].
The remaining sets are printed.
Press [Stop] to cancel printing.
When printing finishes, the stored file is deleted.
To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started, the file is deleted.
If there is a print job outstanding, this is printed before the sample print job.
If the application has a collate option, make sure it is not selected before sending a print job. The printer driver automatically collates Sample Print jobs by default. If the collate option is selected in the application's [Print] dialog box, there may be more prints than required.
Windows 2000 / XP, Windows Server 2003, Windows NT 4.0
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
Right-click the printer icon, and then click [Printing Preference] on the command menu.
If you are using Windows 2000, select the printer, and then perform the following steps.
If you are using Windows XP or Windows Server 2003, select the printer, and then click [Preferences].
Click the [Job Log] tab.
In the [Job Type:] list, click [Sample Print].
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9) characters.
The user ID associates the user with his / her jobs.
Click [OK] to close the printer properties dialog box.
If you are using Windows 2000, perform the following steps.
Set the number of copies to two or more, and then start the printing from the application's [Print] dialog box.
The sample print job is sent to the machine, and one set is printed.
Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps to print the remaining sets.
If you want to delete a saved job, see Deleting a Sample Print File.
On the machine's control panel, press the [Printer] key to display the printer screen.
Press [Print Jobs].
Press [Sample Print Job List].
A list of sample print files stored in the machine appears.
User ID, Date / Time and File Name also appear.
Select the file you want to print by pressing it.
A list of print files stored in the machine appears.
Press [Print] to change the number of sets to be printed.
Enter the new number of sets using the number keys.
If you do not want to change the set quantity, perform the following steps.
You can enter up to 999 sets.
Press [Clear/Stop] to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of all settings is applied.
Press [Yes].
The remaining sets are printed.
Press [Stop] to cancel printing.
When printing finishes, the stored file is deleted.
To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started, the file is deleted.
If there is a print job outstanding, this will be printed before the sample print job.
If the application has a collate option, make sure it is not selected before sending a print job. The printer driver automatically collates Sample Print jobs by default. If the collate option is selected in the application's [Print] dialog box, there may be more prints than required.
Mac OS / Mac OS X
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
Set the number of copies to two or more.
The sample print job is sent to the machine, and one set is printed.
In the pop-up menu, click [Job Log].
On the [Job Type:] pop-up menu, select [Sample Print].
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9) characters.
The user ID associates the user with his / her jobs.
Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps to print the remaining sets.
If you want to delete a saved job, see Deleting a Sample Print File.
On the machine's control panel, press the [Printer] key to display the printer screen.
Press [Print Jobs].
Press [Sample Print Job List].
A list of sample print files stored in the machine appears.
User ID, Date / Time and File Name also appear.
Select the file you want to print by pressing it.
A list of print files stored in the machine appears.
Press [Print] to change the number of sets to be printed.
Enter the new number of sets using the number keys.
If you do not want to change the set quantity, perform the following steps.
You can enter up to 999 sets.
Press [Clear/Stop] to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of all settings is applied.
Press [Yes].
The remaining sets are printed.
Press [Stop] to cancel printing.
When printing finishes, the stored file is deleted.
To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started, the file is deleted.
If there is a print job outstanding, this is printed before the sample print job.
Deleting a Sample Print File
If a printed document is not as required, you can delete the Sample Print file.
On the machine's control panel, press the [Printer] key to display the printer screen.
Press [Print Jobs].
A list of print files stored in the machine appears.
Press [Stored Print Job List].
A list of sample print files stored in the machine appears.
Select the file you want to delete by pressing it.
To cancel a selection, press the highlighted jobs again.
Only one file can be selected at a time.
Press [Delete].
A confirmation screen appears.
Press [Yes] to delete the file.
After the file is deleted the printer screen reappears.
Press [No] to cancel the delete request.
