Program the “Initial Set Up” of a Special Sender. You can also specify the Bypass Tray Paper Size.
Press [Facsimile Features].
Press [Reception Settings].
Press [Program Special Sender].
Press [Initial Set Up].
Select the function you want to program.
In this feature, “Authorized RX” has the same settings as “Reception Settings”.
To programming Authorized RX and Special RX Function, press [Authorized Reception] or [Special Reception Function].
Press [On] or [Off], and then press [OK].
The illustration shows the “Authorized RX” display as an example.
To programming Bypass Tray Paper Size, press [Bypass Tray Paper Size].
You can select a size from [Auto Detect], [Standard Size], or [Custom Size].
If you select [Auto Detect], proceed to steps and .
If you select [Standard Size], proceed to steps, and .
If you select [Custom Size], proceed to steps and to .
Select the size you want to program.
If you select [Standard Size], select a paper size displayed, and then proceed to step.
If you select [Custom Size], proceed to step.
Select the size you want to program from the sizes shown.
Make sure that [Vertical] is selected.
Enter the vertical size of the paper using the number keys, and then press the [] key.
Specify a vertical size from 210 mm (8.3”) to 297 mm 11.6”). You cannot enter a size smaller than 210 mm or larger than 297 mm.
Each time you press [mm] or [inch], the units switch between “mm” and “inch”. If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).
Enter the horizontal size of the paper using the number keys, and then press the [] key.
Specify a horizontal size from 148 mm (5.9”) to 600 mm (23.7”). You cannot enter a size smaller than 148 mm or larger than 600 mm.
Each time you press [mm] or [inch], the units switch between “mm” and “inch”. If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).
Press [OK].
Press [Exit].
Press the [User Tools/Counter] key.
If you select [Auto Detect], the machine recognizes the paper size automatically.
“Reception Settings”, Facsimile Reference