Skip header
 

Top Page > Troubleshooting > Clearing Misfeeds > Removing Jammed Paper > Locating Jammed Paper

Locating Jammed Paper

If a misfeed happens, remove the misfed paper or original following the procedures stated on the sticker on the rear of main unit front cover.

A misfeed has occurred in the place corresponding to the letter displayed on the control panel.

image

1Press the key of the section from where you want to remove the jammed paper.

image

2After each step is complete, press [Next]. To go back to the previous step, press [Previous].

image

3When the jammed paper is entirely removed, restore the machine to its original state.

Note

  • More than one misfeed may be indicated. When this happens, check all the areas indicated.