This section explains how to use control panel and screen-displayed keys.
The display guides you through operations, shows messages, machine status, and destinations registered in the destination lists.
If you press the [Facsimile] or [Clear Modes] key during operation, the standby display appears.
This machine automatically returns to standby mode if you do not use the machine for a certain period of time. You can select the period using the Facsimile Auto Reset Timer in System Settings.
You can have the machine return to standby mode after each transmission using User Parameters (switch 17, bit 3) in the Facsimile Features menu.
To manually return to the standby display, do one of the following:
If you have placed the original in the Auto Document Feeder (ADF) and have not pressed the [Start] key, remove the original.
If you have not placed an original, press the [Clear Modes] key.
If you are in User Tools mode, press the [User Tools/Counter] key.
“System Settings”, General Settings Guide
“Facsimile Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide