Programs
You can store the frequently used copy job settings in the machine memory and recall them for future use.
You can store up to 10 programs.
You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or reset, or immediately after the operation switch is turned on. See “Programming Defaults in Initial Display”.
Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized with User Tools (System Settings) will be selected first. See “Paper Tray Priority”, General Settings Guide.
Programs are not deleted by turning the power off or by pressing the [Clear Modes] key.
