Directional Size Magnification (mm)
Specify the horizontal and vertical lengths of the original and copy image. Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.
Horizontal original size: Amm
Vertical original size: Bmm
Horizontal copy size: amm
Vertical copy size: bmm
Measure and specify the lengths of the original and copy by comparing “A” with “a” and “B” with “b”.
Press [Reduce / Enlarge].
Press [Dir. Size Mag. mm].
Enter the horizontal size of the original with the number keys, and then press [
] key.
You can enter sizes between 1 to 999 mm in 1 mm (0.1”) steps.
Enter the horizontal size of the copy with the number keys, and then press [] key.
Enter the vertical size of the original with the number keys, and then press [] key.
Enter the vertical size of the copy with the number keys, and then press [] key.
Press [OK] twice.
Place the originals, and then press the [Start] key.
To change a length in steps
to , press the key you wish to change and enter the new value.
