Selecting Copy Paper

There are two ways to select copy paper:

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio.

Manual Paper Select

Choose the tray containing the paper you want to copy onto: a paper tray, bypass tray or LCT.

See the following table for copy paper sizes and orientations that can be used with Auto Paper Select (when copying at a ratio of 100%):

Metric version

Where original is set	Paper size and orientation
Exposure glass	A3, B4 JIS, A4, B5 JIS, 8” × 13”
ADF	A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂” × 11”, 8” × 13”, 8K, 16K

Inch version

Where original is set	Paper size and orientation
Exposure glass	11” × 17”, 8¹/₂” × 14”, 8¹/₂” × 11”
ADF	A3, A4, 11” × 17”, 8¹/₂” × 14”, 8¹/₂” × 11”, 5¹/₂” × 8¹/₂”, 10” × 14”, 7¹/₄” × 10¹/₂”

Only the paper trays set to [No Display] or [Recycled Paper] in Paper Type in Tray Paper Setting in System Settings and also set to [Yes] in Apply Auto Paper Select can be selected in Auto Paper Select mode. See “Paper Type: Tray 1-4”, General Settings Guide.
See “Paper Display”, General Settings Guide.