Windows XP, Windows Server 2003 - USB
Installing a printer driver requires Administrators permission. Log on using an account that has Administrators permission.
If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the "USB" port is added to the [Printers] window.
The printer drivers can be installed from the CD-ROM provided with this machine.
If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the CD-ROM provided.
Turn off the power of the machine.
Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
In the Found New Hardware Wizard display, click [[Search for a suitable driver for my device [recommended]] ], and then click [Next >].
To disable Auto Run, press the left [Shift] key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.
Select the [Include this location in the search] check box under [Search for the best driver in these location], and then click [Browse] to select the printer driver location.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:
PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
Check the printer driver location, and then click [Next >].
Click [Continue].
Click [Finish].
If installation is successful, the icon of the printer connected to the "USB001" port is added to the [Printers] window.
If Auto Run starts, click [Cancel], and then [Exit].
The number after “USB” varies depending on the number of printers connected.
