Installing the PostScript 3 Printer Driver (Windows NT 4.0)
Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
If you print from a print server connected to the printer using the DeskTop Binder-SmartDeviceMonitor port, the client cannot use Recovery Printing and Parallel Printing.
To print from a Windows NT 4.0 print server, install the printer driver before you connect the print server to the printer.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Network printer server], and then click [Next >].
Click [Next >].
Double-click the computer name you want to use as a print server in the [Shared printers] window.
Select the printer you want to use, and then click [Next >].
Check the location of the selected printer is shown, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Specify whether or not to print a test page, and then click [Finish].
Restart the computer to complete installation.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the CD-ROM root directory.
