Installing the PostScript 3 Printer Driver (Windows NT 4.0 - TCP/IP)
Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Select [My Computer], and then click [Next >].
Click [Add Port...].
Click [DeskTop Binder-SmartDeviceMonitor], and then click [New Port...].
Click [TCP/IP], and then click [Search].
A list of printers using [TCP/IP] appears.
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.
Click [Close] to close the [Printer Port] dialog box.
Click [Next >].
Check that the name of the machine whose driver you want to install is selected, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Specify whether or not to share the printer, and then click [Next >].
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
Restart the computer to complete installation if necessary.
A user code can be set after the printer driver installation . For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the CD-ROM root directory.
