This section contains the machine's electrical and hardware specifications, including information about its options.
Component |
Specifications |
---|---|
Resolution |
600 × 600 dpi 300 × 300 dpi |
Printing speed |
Type 1:
Type 2:
(A4, 81/2” × 11” plain paper) Printing speeds depend on the machine. Check which type of machine you have. See General Settings Guide. |
Interface |
Standard:
Option:
|
Network protocol |
IPv4, IPv6, IPX/SPX, AppleTalk |
Printer language |
Standard: PCL 6/5c, RPCS Option: PostScript 3, PDF Direct, PictBridge |
Fonts |
PCL 6/5c: Monotype Imaging 35 Intellifonts, 10 TrueType fonts, 13 International fonts, and 1 Bitmap font. PostScript 3 : 136 fonts (Type 2:24, Type 14:112) |
Memory |
1024 MB |
Hard disk |
Storage capacity : 40 GB |
Network cable |
100BASE-TX / 10BASE-T shielded twisted-pair (STP, Category/Type5) cable. |
USB Interface (Standard) |
|
When using MacOS, use only the standard USB Interface. The optional USB interface board is not supported.
When using the USB Interface (Standard) with Mac OS 10.3.3, USB2.0 is supported.
When using the USB Interface (Standard) with Windows Me, install USB Printing Support. Windows Me only supports USB 1.1 speed.