The printer status can be checked using the following commands:
UNIX: Use the "lpq" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
mshell: Use the "status" command.
Messages |
Description |
---|---|
1-Sheet Bypass Error: No Select |
The one sheet bypass tray is open but printing from another tray was selected. |
1-Sheet Bypass Error: Not Open |
The one sheet bypass tray is closed but printing from the one sheet bypass tray was selected. |
1-Sheet Output Error: No Select |
The one sheet bypass tray is open but printing from another tray was selected. |
1-Sheet Output Error: Not Open |
The one sheet bypass tray is closed but printing from the one sheet bypass tray was selected. |
Access Restricted |
The job was canceled because user have no authority. |
Add staples (Booklet: Back) |
The staple of booklet finisher (back) is exhausted. |
Add staples (Booklet: Both) |
The staple of booklet finisher is exhausted. |
Add staples (Booklet: Front) |
The staple of booklet finisher (front) is exhausted. |
Adjusting... |
The machine is initializing or calibrating. |
Alert at Printer: Yellow LED |
An error has occurred. |
Call Service Center |
There is a malfunction in the machine. |
Canceled |
The job is reset. |
Canceling Job... |
The job is being reset. |
Card/Counter not inserted |
The machine is waiting for prepaid card or key. |
Coin or amount not inserted |
The machine is waiting for coin to be inserted. |
Coin/Key Counter not inserted |
The machine is waiting for coin or key counter. |
Configuring... |
Setting is being changed. |
Cooling Down Fusing Unit... |
The fusing unit is cooling down. |
Copy Tray |
Internal tray is full. |
Cover Open: ADF |
The document feeder is open. |
Cover Open: Bridge Unit Left |
The cover of the left bridge unit is open. |
Cover Open: Bridge Unit Center |
The cover of the middle bridge unitis open. |
Cover Open: Duplex Unit Left |
The cover of the left duplex unitis open. |
Cover Open: Duplex Unit Right |
The cover of the right duplex unitis open. |
Cover Open: Fin. Front Left |
A front left cover of Finisher is open. |
Cover Open: Fin. Front Right |
A front right cover of Finisher is open. |
Cover Open: Bridge Unit Right |
The cover of the right bridge unit is open. |
Cover Open: Duplex Unit |
The cover of the duplex unit is open. |
Cover Open: Finisher |
The cover of Finisher is open. |
Cover Open: Finisher Cover |
The cover of Finisher is open. |
Cover Open: Finisher Front |
The front cover of Finisher is open. |
Cover Open: Finisher Rear |
The cover of the rear finisher is open. |
Cover Open: Finisher Upper |
The upper cover of Finisher is open. |
Cover Open: Finisher Upper-L |
A upper left cover of Finisher is open. |
Cover Open: Finisher Upper-R |
A upper right cover of Finisher is open. |
Cover Open: Front Cover |
The front cover is open. |
Cover Open: Fusing Unit Cover |
The cover of the fusing unit is open. |
Cover Open: Interposer Tray Low |
The lower cover of the interposer unit is open. |
Cover Open: Interposer Tray Up |
The upper cover of the interposer unit is open. |
Cover Open: LCT Front Cover |
The front cover of the Large Capacity tray is open. |
Cover Open: Lower Left Cover |
The lower left cover is open. |
Cover Open: Lower Right Cover |
The lower right cover is open. |
Cover Open: Mailbox |
A cover of Mailbox is open. |
Cover Open: Mid-Covers |
Covers for anti jamming are open. |
Cover Open: Z-folding Upper |
An upper cover of Z fold unit is open. |
Cover Open: Right Cover |
The right cover is open. |
Cover Open: Shift Tray Cover |
The shift tray cover is open. |
Cover Open: Upper Cover |
The upper cover is open. |
Cover Open: Upper Left Cover |
The upper left cover is open |
Cover Open: Upper Right Cover |
The upper right cover is open. |
Data Size Error |
The data size error occurred. |
Empty: Black Toner |
The black toner cartridge is almost empty. |
Empty: Cyan Toner |
The cyan toner cartridge is almost empty. |
Empty: Magenta Toner |
The magenta toner cartridge is almost empty. |
Empty: One of Toner Bottles |
One of the toner bottles is empty. |
Empty: Toner |
The toner cartridge is almost empty. |
Empty: Yellow Toner |
The yellow toner cartridge is almost empty. |
Energy Saver Mode |
The machine is in Energy Saver Mode. |
Envelope Setting Error: None |
Printing paper type other than envelope is instructed when B2 lever is down. |
Envelope Setting Error: Others |
Printing envelope is instructed when B2 lever is down. |
Error |
An error has occurred. |
Error at Printer: Red LED |
An error has occurred. |
Error in Printer |
An error has occurred. |
Error: Address Book |
An error has occurred in the data of the address book. |
Error: Command Transmission |
An error has occurred in the machine. |
Error: DIMM Value |
A memory error occurred. |
Error: Ethernet Board |
An Ethernet board error has occurred. |
Error: HDD Board |
A hard disk drive board error has occurred. |
Error: IEEE1394 Board |
An IEEE 1394 interface board error has occurred. |
Error: Media Link Board |
An error has occurred on the media link board. |
Error: Memory Switch |
A memory switch error has occurred. |
Error: Optional Font |
An error has occurred in the font file of the machine. |
Error: Optional RAM |
An error has occurred in the optional memory unit. |
Error: Parallel I/F Board |
An error has occurred in the parallel interface. |
Error: PDL |
An error has occurred in the page description language. |
Error: Rem. Certificate Renewal |
An error has occurred in the remote sever renewal. |
Error: USB Board |
An error has occurred in theUSB interface board. |
Error: USB Interface |
An error has occurred in the USB interface. |
Error: Wireless Card |
Wireless card is not inserted during start up, or the IEEE 802.11b interface unit or the wireless card is taken out after start up . |
Error: Wireless Card or Board |
An error has occurred in the IEEE802.11b interface unit. |
Exceed Booklet Stapling Limit |
The printing has exceeded the stapling limit of the booklet finisher. |
Full: 1-Sheet Output |
The one sheet output tray is full. |
Full: Copy Tray |
The output paper tray is full. |
Full: Finisher |
Finisher tray is full. |
Full: Finisher Booklet Tray |
Booklet tray of Finisher is full. |
Full: Finisher Shift Tray |
Shift tray of Finisher is full. |
Full: Finisher Shift Tray 1, 2 |
The shift tray 1 and 2 of Finisherare full. |
Full: Finisher Tray |
Finisher Tray is full. |
Full: Finisher Upper Tray |
Finisher's upper tray is full. |
Full: Front Collector Bottle |
Front waste toner bottle is full. |
Full: Hole Punch Receptacle |
Punch Chip receptacle for hole punch is full. |
Full: Internal Shift Tray |
The internal shift tray is full. |
Full: Internal Tray 1 |
Internal tray 1 is full. |
Full: Internal Tray 2 |
Internal tray 2 is full. |
Full: Mailbox Tray 1 |
Mailbox Tray 1 is full. |
Full: Mailbox Tray 2 |
Mailbox Tray 2 is full. Full: |
Full: Mailbox Tray 3 |
Mailbox Tray 3 is full. |
Full: Mailbox Tray 4 |
Mailbox Tray 4 is full. |
Full: Mailbox Tray 5 |
Mailbox Tray 5 is full. |
Full: Mailbox 6 |
Mailbox Tray 6 is full. |
Full: Mailbox Tray 7 |
Mailbox Tray 7 is full. |
Full: Mailbox Tray 8 |
Mailbox Tray 8 is full. |
Full: Mailbox Tray 9 |
Mailbox Tray 9 is full. |
Full: Waste Staples |
Waste Staples. |
Full: Waste Toner |
Waste toner is full. |
Full: Waste Toner Bottle |
Waste toner bottle is full. |
Hex Dump Mode |
It is a hex dump mode. |
Immed. Trans. not connected |
It did not connect directly with the other party of the transmission. |
Immediate Transmission Failed |
An error has occurred while transmitting directly. |
In Use: Copier |
The copier is being used. |
In Use: Fax |
The fax is being used. |
In Use: Finisher |
Other functions is using Finisher. |
In Use: Input Tray |
Other functions is using the input tray. |
In Use: Staple Unit |
Other functions is using the staple unit. |
Independent-supplier Toner |
Toner that is not recommended is set. |
Key Card not inserted |
The machine is waiting for key card to be inserted. |
Key Card/Counter not inserted |
The machine is waiting for key card or key counter to be inserted. |
Key Counter not inserted |
The machine is waiting for key counter to be left in it. |
Loading Toner... |
Toner is being supplied. |
Low: Black Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Low: Cyan Toner |
The cyan toner cartridge is not set correctly, or toner is almost running out. |
Low: Magenta Toner |
The magenta toner cartridge is not set correctly, or toner is almost running out. |
Low: Toner |
The toner cartridge is not set correctly,or toner is almost running out. |
Low: Yellow Toner |
The yellow toner cartridge is not set correctly, or toner is almost running out. |
Malfunction: Booklet Stapler |
There is a problem with booklet finisher. |
Malfunction: Booklet Processor |
There is a problem with booklet finisher. |
Malfunction: Duplex Unit |
There is a problem with the duplex unit. |
Malfunction: Ext. Charge Unit |
There is a problem with the external charge unit. |
Malfunction: Finisher |
There is a problem with the finisher. |
Malfunction: Interposer |
There is a problem with the interposer. |
Malfunction: LCT |
There is a problem with the large capacity tray. |
Malfunction: Multi-hole Punch GPC |
There is a problem with the multi hole punching unit. |
Malfunction: Output Tray |
There is a problem with the output tray. |
Malfunction: Staple Unit |
There is a problem with the staple unit. |
Malfunction: Tray 1 |
There is a problem with tray 1. |
Malfunction: Tray 2 |
There is a problem with tray 2. |
Malfunction: Tray 3 |
There is a problem with tray 3. |
Malfunction: Tray 3 (LCT) |
There is a problem with tray 3 (LCT). |
Malfunction: Tray 4 |
There is a problem with tray 4. |
Malfunction: Tray 5 |
There is a problem with tray 5. |
Malfunction: Tray 6 |
There is a problem with tray 6. |
Malfunction: Tray 7 |
There is a problem with tray 7. |
Memory Low: Copy |
Memory shortage has occurred while the copy was operating. |
Memory Low: Data Storage |
Memory shortage has occurred while the document was being accumulated. |
Memory Low: Fax Scanning |
Memory shortage has occurred while transmitting the fax. |
Memory Low: Scanning |
Memory shortage has occurred while the scanner was working. |
Miscellaneous Error |
Other error has occurred. |
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
Near Replacing: Black PCU |
Prepare the new black photoconductor unit. |
Near Replacing: Cleaning Unit |
Prepare the new cleaning unit. |
Near Replacing: Color Dev. Unit |
Prepare the new colour development unit. |
Near Replacing: Color PCU |
Prepare the new colour photoconductor unit. |
Near Replacing: Develop. Unit C |
Prepare the new development unit (cyan). |
Near Replacing: Develop. Unit K |
Prepare the new development unit (black). |
Near Replacing: Develop. Unit M |
Prepare the new development unit (magenta). |
Near Replacing: Develop. Unit Y |
Prepare the new development unit (yellow). |
Near Replacing: Fusing Unit |
Prepare the new fusing unit. |
Near Replacing: Maintenance Kit |
Prepare the new maintenance kit. |
Near Replacing: Transfer Unit |
Prepare the new transfer unit. |
Nearly Full: Collector Bottle |
Waste toner bottle is nearly full. |
Nearly Full: Waste Toner |
Waste toner bottle is nearly full. |
Nearly Full:Front CollectBottle |
Front collector bottle is nearly full. |
Nearly Full:Sucked Toner Bottle |
Waste toner bottle is nearly full. |
Need more Booklet Staples |
Stapler has almost run out of staples. |
No Paper: 1-Sheet Bypass |
There is no paper in 1-sheet bypasstray. |
No Paper: Interposer Tray |
There is no paper in interposer unit. |
No Paper: Selected Tray |
There is no paper in specified tray. |
No Paper: Tray 1 |
There is no paper in tray 1. |
No Paper: Tray 1 (LCT) |
There is no paper in the large capacity tray (tray 1). |
No Paper: Tray 2 |
There is no paper in tray 2. |
No Paper: Tray 3 |
There is no paper in tray 3. |
No Paper: Tray 3 (LCT) |
There is no paper in tray 3 (Large Capacity tray). |
No Paper: Tray 4 |
There is no paper in tray 4. |
No Paper: Tray 5 |
There is no paper in tray 5. |
No Paper: Tray 6 |
There is no paper in tray 6. |
No Paper: Tray 7 |
There is no paper in tray 7. |
Not Detected: B2 Lever |
B2 lever is not correctly set. |
Not Detected: Black Toner |
Black toner is not correctly set. |
Not Detected: Charger |
Charger is not correctly set. |
Not Detected: Cleaning Unit |
The cleaning unit is not correctly set. |
Not Detected: Cyan Toner |
Cyan toner is not correctly set. |
Not Detected: Develop. Unit (C) |
The development unit (cyan) is not correctly set. |
Not Detected: Develop. Unit (K) |
The development unit (black) is not correctly set. |
Not Detected: Develop. Unit (M) |
The development unit (magenta) is not correctly set. |
Not Detected: Develop. Unit (Y) |
The development unit (yellow) is not correctly set. |
Not Detected: Duplex Feed Unit |
The duplex unit is not correctly set. |
Not Detected: Duplex Unit |
The duplex feed unit is not correctly set. |
Not Detected: Finisher |
Finisher is not correctly set. |
Not Detected: Fusing Unit |
The fusing unit is not correctly set. |
Not Detected: Input Tray |
The paper feed tray is not correctly set. |
Not Detected: Interposer |
Interposer unit is not correctly set. |
Not Detected: LCT |
A large amount of paper feed tray is not correctly set. |
Not Detected: Magenta Toner |
Magenta toner is not correctly set. |
Not Detected: PCU |
The photoconductor unit is not correctlyset. |
Not Detected: PCU (C) |
The photoconductor unit (cyan) is not correctly set. |
Not Detected: PCU (K) |
The photoconductor unit (black) is not correctly set. |
Not Detected: PCU (M) |
The photoconductor unit (magenta) is not correctly set. |
Not Detected: PCU (Y) |
The photoconductor unit (yellow) is not correctly set. |
Not Detected: Transfer Roller |
The transfer roller is not correctly set. |
Not Detected: Transfer Unit |
The transfer unit is not correctly set. |
Not Detected: Tray 1 |
Tray 1 is not correctly set. |
Not Detected: Tray 1 (LCT) |
The large capacity tray (tray 1) is not correctly set. |
Not Detected: Tray 2 |
Tray 2 is not correctly set. |
Not Detected: Tray 3 |
Tray 3 is not correctly set. |
Not Detected: Tray 3 (LCT) |
The large capacity tray (tray 3)is not correctly set. |
Not Detected: Tray 4 |
Tray 4 is not correctly set. |
Not Detected: Tray 5 |
Tray 5 is not correctly set. |
Not Detected: Tray 6 |
Tray 6 is not correctly set. |
Not Detected: Tray 7 |
Tray 7 is not correctly set. |
Not Detected: WasteToner Bottle |
Waste toner bottle is not correctly set. |
Not Detected: Yellow Toner |
Yellow toner is not correctly set. |
Not Reached, Data Deleted |
Unreached job is deleted. |
Offline |
Printer is offline. |
Original on Exposure Glass |
The original remains on the exposure glass. |
Operating Thermo-range Error |
The machine is operating outside the permissible temperature range. |
Panel Off Mode |
The machine is in Panel-Off mode. |
Panel Off Mode>>Printing ava. |
The machine is in Control Panel-Off mode. |
Paper in Duplex Unit |
The paper remains in the duplex unit. |
Paper in Finisher |
The paper remains in Finisher. |
Paper Misfeed: ADF |
The paper has jammed in Document Feeder. |
Paper Misfeed: BookletProcessor |
The paper has jammed in booklet finisher. |
Paper Misfeed: Duplex Unit |
The paper has jammed in the duplex unit. |
Paper Misfeed: Finisher |
The paper has jammed in Finisher. |
Paper Misfeed: Input Tray |
The paper has jammed in the input tray. |
Paper Misfeed: Internal Path |
The paper has jammed inside the machine. |
Paper Misfeed: Internal/Output |
The paper has jammed inside the machine. |
Paper Misfeed: Interposer |
The paper has jammed in interposerunit. |
Paper Misfeed: Mailbox |
The paper has jammed in the mailbox. |
Paper Misfeed: Z-folding unit |
The paper has jammed in Z fold unit. |
Paper Misfeed:Booklet Processor |
The paper has jammed in booklet finisher. |
Paper on Finisher Shift Tray 2 |
The paper remains in Finisher Shift Tray 2. |
Paper on FinisherShiftTray1, 2 |
The paper remains in Finisher Shift Tray 1 and 2. |
Paper on Paper Bypass |
The paper remains in the bypass tray. |
Prepaid Card not inserted |
The machine is waiting for prepaid card to be inserted. |
Print Complete |
The print was completed. |
Printing... |
Printing is in progress. |
Processing |
Data is being processed. |
Proxy Address / Port Incorrect |
The proxy address and port setting is incorrect. |
Proxy User / Password Incorrect |
The proxy user name and password setting is incorrect. |
RC Gate Connection Error |
Failed connection with RC Gate. |
Ready |
The machine is ready to print. |
Remove seal strip on: Black |
The seal strip on the new development unit (black) is still attached. |
Remove seal strip on: Cyan |
The seal strip on new development unit (cyan) is still attached. |
Remove seal strip on: Magenta |
The seal strip on new development unit (magenta) is still attached. |
Remove seal strip on: Yellow |
The seal strip on new development unit (yellow) is still attached. |
Renewing Remote Certificate |
The remote certificate is being renewed. |
Replace Charger Unit |
It is time to replace the charger unit. |
Replace Black PCU |
It is time to replace the black photoconductor unit. |
Replace Charger Kit |
It is time to replace the charger kit. |
Replace Cleaning Web |
It is time to replace the Cleaning Web. |
Replace Color PCU |
It is time to replace the photoconductor unit (color). |
Replace Develop. Unit |
It is time to replace the development unit. |
Replace Develop. Unit (Black) |
It is time to replace the development unit (black). |
Replace Develop. Unit (Color) |
It is time to replace the development unit (color). |
Replace Develop. Unit (Cyan) |
It is time to replace the development unit (cyan). |
Replace Develop. Unit (Magenta) |
It is time to replace the development unit (magenta). |
Replace Develop. Unit (Yellow) |
It is exchange time of the development unit (yellow). |
Replace Feed Belt |
It is time to replace the feed belt. |
Replace Feed Roller |
It is time to replace the transfer roller. |
Replace Fuser Oil Unit |
It is time to replace the fuser oil unit. |
Replace Fusing Unit |
It is time to replace the fusing unit. |
Replace PCU |
It is time to replace the photoconductor unit. |
Replace PCU(Color) |
It is time to replace the photoconductor unit(Colour). |
Replace Sustainer Unit |
It is time to replace the sustainer unit. |
Replace Toner Suction Motor |
It is time to replace the toner suction motor. |
Replace Transfer Belt |
It is time to replace the transfer belt. |
Replace Transfer Cleaning Unit |
It is time to replace the transfer cleaning unit. |
Retarding... |
Printing has stopped momentarily to allow printed sheets to dry. |
SD Card Authentication failed |
SD card authentication failed. |
Setting Remotely |
The RDS setting is being processed. |
Shift Tray |
Internal output tray is full. |
Skipped due to Error |
Skipped the error. |
Storage Complete |
The storage is complete. |
Storage Failed |
The storage has failed. |
Supplies Order Call failed |
The supply order call has failed. |
Suspend / Resume Key Error |
Finisher stop button was pressed. |
Transmission Aborted |
The transmission was interrupted. |
Transmission Complete |
The transmission completion was completed. |
Transmission Failed |
The transmission has failed. |
Tray Error: Chaptering |
The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing. |
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
Unit Left Open: ADF |
Document feeder is opened. |
Waiting for Job Suspension |
The machine is waiting for Job Suspension. |
Warming Up... |
The machine is warming up. |
For details about UNIX commands, see UNIX Supplement.
Check the error contents that may be printed in the configuration page. For details about printing a configuration page, see Printer Reference.