Follow the procedure below to configure Energy Saver mode.
Start SmartDeviceMonitor for Admin.
On the [Group:] menu, point to [Yes], and then click [TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using TCP/IP SNMP v3, enter the user authentication.
Select the machine whose settings you want to make.
To make settings for all machines in the selected group, select no machine.
On the [Group:] menu, point to [Energy Saver Mode], point to [Set Individually] to make the settings for only the selected machine or point to [Set By Group] to make the settings for all machines in the selected group, and then click [On] or [Off].
Quit SmartDeviceMonitor for Admin.
For details about the setting for Energy Saver mode, see SmartDeviceMonitor for Admin Help.