Interface Settings
Menu |
Description |
Machine IPv4 Address |
Specifies the machine IPv4 address and subnet mask in the network environment. |
IPv4 Gateway Address |
Configure the gateway address for the router or host computer used as a gateway. |
Machine IPv6 Address |
Specifies the machine IPv6 address and subnet mask in the network environment. |
IPv6 Gateway Address |
Configure the gateway address for the router or host computer used as a gateway. |
IPv6 Gateway Address |
Specifies the automatic configuration of the IPv6 Stateless Address. |
DNS Configuration |
Make settings for the DNS server. |
DDNS Configuration |
Specifie the DDNS settings. |
Domain Name |
Specifie the domain name. |
WINS Configuration |
Specifie the WINS server settings. |
Effective Protocol |
Select the protocol to use in the network. |
NCP Delivery Protocol |
Select the protocol for NCP delivery: |
NW Frame Type |
Select the frame type when you use NetWare. |
LAN Type |
Select interface, IEEE 802.11b (wireless LAN) or Ethernet when you have installed the optional IEEE 802.11b interface unit. |
Ethernet Speed |
Set the access speed for networks. |
Ping Command |
Check the network connection with ping command using given IP address. |
SMB Computer Name |
Specifies the SMB computer name. |
SMB Work Group |
Specifies the SMB work group. |
Permit SNMPv3 Communication |
Set the encrypted communication of SNMP v3. |
Permit SSL / TLS Communication |
Set the encrypted communication of SSL/TLS. |
Host Name |
Specify the host name. |
Machine Name |
Specify the machine name. |
IPv4 over 1394 |
Specifies when you use the function of the IEEE 1394 interface to connect the machine to the network, or you print from computer with the IP over 1394 driver. |
SCSI print (SBP-2) |
Specifies when you print using the SCSI print client function supported by Windows 2000/XP, or Windows Server 2003. |
Bidirectional SCSI print |
Specifies the printer's response mode etc. for status requests when using the IEEE 1394 interface. |
Communication Mode |
Specifies the communication mode of the wireless LAN. |
SSID Setting |
Specifies SSID to distinguish the access point in infrastructure mode or 802.11 ad hoc mode. |
Channel |
Specifies a channel when you select 802.11b ad hoc mode or ad hoc mode. |
WEP (Encryption) Key |
Specifies the encryption of the IEEE 802.11b (wireless LAN). |
Transmission Speed |
Specifies the communication speed of the IEEE 802.11b (wireless LAN). |
Restore Factory Defaults |
Return the IEEE 802.11b (wireless LAN) settings to their defaults. |
File Transfer Settings
Menu |
Description |
SMTP Server |
Specifies the SMTP server name. |
SMTP Authentication |
Configures SMTP authentication (PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5 |
POP before SMTP |
Configures POP authentication (POP before SMTP). |
Reception Protocol |
Specifies Reception Protocol for receiving Internet faxes. |
POP3 / IMAP4 Settings |
Specify the POP3 or IMAP4 server name for receiving Internet faxes. |
Administrator's E-mail Address |
This appears as the sender's addresson e-mailed scanned documents, if the sender is not specified . |
E-mail Communication Port |
Specifies the [POP3], [IMAP4], and [SMTP] port numbers for receiving Internet faxes. |
E-mail Reception Interval |
Specify, in minutes, the time limit for receiving Internet faxes via POP3 or IMAP4 server. |
Max. Reception E-mail Size |
Specifies the [Max. Reception E-mail Size] for receiving Internet faxes. |
E-mail Storage in Server |
Specifies whether or not to store received Internet fax e-mails on the POP3 or IMAP4 server. |
Program / Change / Delete E-mail Message |
Specify the user name and password required when sending scan file directly to a shared folder on a computer running Windows, or to an FTP server. |
Default User Name / Password (Send) |
Specifies the user name and password required when sending scan file directly to a shared folder on a computer running Windows, or to an FTP server. |
Program / Change / Delete Subject |
Program, change, or delete the subject used when sending an Internet fax or scan file as an attachment. |
Fax E-mail Account |
Specify [E-mail Address],[User Name] , and [Password] for receiving Internet faxes. |
Scanner Resend Interval Time |
Specifies the interval the machine waits before resending scan file, if they cannot be sent to the delivery server or mail server. |
Number of Scanner Resends |
Sets a maximum number of times scan file is resent to the delivery server or mail server |