Resending a File

Machine memory stores documents that could not be successfully transmitted using Memory Transmission. Use this procedure to resend these documents.

Set “Store documents in memory that could not be transmitted” to “On” in User Parameters (switch 24, bit 0) in the Facsimile Features menu.

Press [Change TX / Info].

Press [Check / Stop Transmission File].

Select the file you want to resend.

“TX failed” is displayed for files that could not be sent.

If multiple destinations were specified, only the destination you specify first appears.

If multiple destinations were specified, only the number of destinations for unsent documents appears.

Press [Transmit Failed File].

To add a destination, press [Add Destination], and then specify the destination.

Press [OK].

Repeat from step to resend another file.

To cancel transmissions, press [Cancel]. The display returns to that of step .

Press [Exit] twice.

The standby display appears.

Transmission starts.

Files that could not be transmitted are kept for either 24 or 72 hours, depending on the setting you make in User Parameters (switch 24, bit 1) in the Facsimile Features menu.